Graham
Staff member
All interested Bowling Centre technicians are invited to the following locations for a Seminar on Brunswick GS Pinsetter Operation and Maintenance. Attendance is free of charge, and will be conducted over two days :
November 15th & 16th , OZ Tenpin Altona
November 21nd & 22nd , AMF Blacktown
Including a Authority 22 Lane Machine Demo on the 22nd November at AMF Blacktown.
Interested people must register their interest with Heritage Bay on 0295677076 prior to the day.
Below is an agenda of what will be discussed at the seminars.
Brunswick Bowling Center Operating Procedures
Day 1
A. Check in / Registration
B. Student Orientation
1. Classroom Procedures
2. Course Outline and Goals
C. Safety Procedures
D. Pinsetter Orientation
E. Subassembly Parts Identification / Operation and Adjustment
1.Transport Band & Ball Cushion
2.Ball Accelerator
3.Elevator
4.Distributor
5.Setting Table
6.Sweep Wagon
7.Drive Frame
8.Motors
F.Pinsetter Improvements
Day 2
Review Day 1
A.Pinsetter Maintenance
B.Pinsetter Troubleshooting
C.Bowling Center Operating Procedures
November 15th & 16th , OZ Tenpin Altona
November 21nd & 22nd , AMF Blacktown
Including a Authority 22 Lane Machine Demo on the 22nd November at AMF Blacktown.
Interested people must register their interest with Heritage Bay on 0295677076 prior to the day.
Below is an agenda of what will be discussed at the seminars.
Brunswick Bowling Center Operating Procedures
Day 1
A. Check in / Registration
B. Student Orientation
1. Classroom Procedures
2. Course Outline and Goals
C. Safety Procedures
D. Pinsetter Orientation
E. Subassembly Parts Identification / Operation and Adjustment
1.Transport Band & Ball Cushion
2.Ball Accelerator
3.Elevator
4.Distributor
5.Setting Table
6.Sweep Wagon
7.Drive Frame
8.Motors
F.Pinsetter Improvements
Day 2
Review Day 1
A.Pinsetter Maintenance
B.Pinsetter Troubleshooting
C.Bowling Center Operating Procedures
