Monster SlayR question

[Toon]

Hey guys,

So I have a Monster SlayR which i bought for the big backends of the NT. However, the backend has gotten even bigger! So I want to put a higher finish on it, but im not sure what the Slayer comes with.

Can anyone tell me what the OOB finish is on the SlayR. Can't find it anywhere. I know some of the older balls had quite low 350/500 etc.

Hope someone can help

 

[Macka69]

Hi Toon, Found this on their website.

The Monster SlayR is finished with a high gloss surface which enhances its appearance and reduces hooking action in
the oil. High gloss finishes can sometimes cause over/under reactions, too little hooking action in the oil, then too much
hooking action off the dry, which can be hard to control. To increase hooking action and smooth out the ball reaction dull
the surface, first with a fine 800-1000 grit abrasive. If more hooking action and a smoother reaction is desired dull the
surface of the ball with a coarse 320-400 grit abrasive.
*Evenly wet sand to a 400-girt finish then apply Brunswick's Factory Finish "High Gloss Polish

Hope this helps
Lyndon